EPEver DuoRacer DR1206N-DDS 10A MPPT Dual Regulator
One of the most trusted manufacturers on the market, EPsolar combines reliability with performance to bring excellent value for money. The new DuoRacer series from EPEver combines years of expertise and end-customer requirements to improve both protections and requirements in an ever-changing off-grid solar market.
DuoRacer MPPT charge controller is made for charging two batteries at the same time in a solar system. This controller supports multiple life battery (BATT1) types, including Sealed, Gel, Flooded, LiFePO4, and Li-NiCoMn, which is suitable for RV, Camper, Boat, and so on. The device recognizes the start battery (BATT2) system voltage automatically, and trickle charges the battery when the conditions are satisfied. The controller adopts the advanced MPPT control algorithm,which will minimize the maximum power point loss rate and loss time,also fast track the maximum power point(MPP) of the PV array, and obtain the maximum energy from solar array under any conditions. The energy utilization in the MPPT solar system is increased by 20-30% compared with PWM charging method. When there is no manual operation for a long time, and the charging conditions cannot be reached, the controller will turn to low-power mode, which reduces the loss and battery power waste to enhance the products life. The system parameters are shown and set by LED/LCD or the MT11 remote meter (Accessory).
The AES control signal of the car refrigerator is built in the controller, which will supply the surplus solar power to the refrigerator
to avoid energy waste. The controller comes with IP33 protection level, which is waterproof and dustproof. Multiple protection
features, including battery overcharge protection, over discharge protection, and reverse connection protection of the PV and
battery, which effectively ensure the solar system safety, stability, and lifetime.
- Advanced Maximum Power Point Tracking (MPPT) algorithm - minimising MPP loss rate
- Ultra-fast, high tracking efficiency no less than 99.5%
- Multi-function LCD displays system information intuitively
- Fully programmable function via PC software or remote meter
- Compatible with lead-acid batteries and lithium batteries
- Over-temperature protection, PV reverse polarity protection, Battery overcharge protection, Battery over discharge protection, Battery reverse polarity protection
- Max Open Circuit Voltage: ~46-60V
- Battery Voltage Range: 8.5-32V
- Max PV input at 12V: 130W
- Max PV input at 24V: 260W
- Max Battery Charge Current: 10A
- Dimensions: 227 x 143 x 58 mm
- Weight: 0.8 kg
NB: Please note that this controller requires common negative grounding.