1.5m Harness for Regulators 35mm2 cable
A pair of 1.5m cables with 8mm/10mm ring lugs professionally crimped and sealed to one end and an inline midi fuse of your choice (please select from the options above). This harness makes it easy to connect your regulator to your batteries, simply attach the bare ends of the harness to the terminals on your regulator and the ring terminals to your battery terminals or terminal clamps.
This harness is made from 35mm2 cable and is suitable for currents up to 150A at 12V. Fuses are Mega type and are available in 100A, 125A and 150A. Please select a fuse with a slightly higher rating than the rating of your regulator. M10 ring terminals on positive, M8 on negative unless specified otherwise.
These harnesses are available in different lengths. Please get in touch if you require something specific.